Disclaimer: This information is provided as is. There may be errors in this information. You may use this information only if you agree that Minimalist / Coinop.org, its employees, and noted authors will never be held responsible for any damage, injury, death, mayhem, etc. caused by errors in the information. When working with high voltage, never work alone and always follow safety precautions.

Document Title: [Tron tech.html (html file)]

Tron Pinouts

Tron Pinouts

submitted by unknown

There is a Filter Assembly and 5 boards not including the Angle Encoder Board (2 of them if it's a cocktail): Power Supply, Dual Amp, Video Gen, CPU, and Sound I/O (actually, I believe it's labeled SUPER Sound I/O. Can you say `WOW!'?).

The only boards you'll actually need to play the game are the Video Gen, CPU, and Sound I/O and these are actually attached in a three board sandwich. You'll need to make a conversion harness and find a way to amp the sound, though.


=======================================
VIDEO GEN BOARD (A084-90908-A968)
=======================================

This board has no connectors that go
outside of the 3 board sandwich.  It
only has a couple of connectors for
those 2 thin ribbon cables which run
to the CPU Board.



=======================================
CPU BOARD (A084-91399-A968)
=======================================

This board has 5 connectors for those
thin ribbon cables.  2 go to the Video
Gen Board and 3 go to the SUPER Sound
I/O Board.  Outside of that is:

J1 - 20 pin (GOES TO J4 POWER SUPPLY)

2  - +5v
3  - +5v
4  - +5v
6  - GND
7  - GND
10 - GND
17 - RESET
16 - V.BATT
18 - +12v
20 - A.GND
15 - KEY

(2 WIRES GO TO J5 POWER SUPPLY)

5  - +5v
14 - GND

----------------------------------------

J2 - 9 pin (MONITOR)

1 - RED
2 - GND
3 - GREEN
4 - GND
5 - BLUE
6 - GND
7 - KEY
8 - /HBLNK
9 - /VBLNK



==========================================
SOUND I/O BOARD (A084-90009-A968)
==========================================

J3 - 9 pin (TO 1K VOLUME CONTROL)

1  RVR   ------\       TO 1K VOLUME CONTROL
2  RVS   ------|           "      " (center tap)
3  RV12  ------/           "      "
4  - KEY

(4 WIRES GO TO J1:2,3,6 ON THE DUAL AMP BOARD)

6  - RIGHT SHIELD
7  - RIGHT AUDIO
8  - LEFT SHIELD
9  - LEFT AUDIO

------------------------------------------

J4 - 19 pin

1  - COIN 1
2  - COIN 2
3  - PLAYER 1 START
4  - PLAYER 2 START
5  - PLAYER 1 FIRE
6  - TILT
7  - SERVICE
8  - TEST
9  - COMMON (J4:3-5,7; J5:1-8; J6:9)
14 - KEY
19 - COMMON (J4:1,2,6,8)

(7 WIRES GO TO 10-4 ON THE
 PLAYER ONE ANGLE ENCODER BOARD)

10 - D0
11 - D1
12 - D2
13 - D3
15 - D4
16 - D5
17 - D6

-------------------------------------------

J5 - 23 pin (9 WIRES GROUNDED BY J4:9)

1  - PLAYER 1 LEFT
2  - PLAYER 1 RIGHT
3  - PLAYER 1 UP
4  - PLAYER 1 DOWN
5  - PLAYER 2 LEFT
6  - PLAYER 2 RIGHT
7  - PLAYER 2 UP
8  - PLAYER 2 DOWN
19 - KEY

(2 WIRES GO TO J5 POWER SUPPLY)

20 - COIN METER RETURN GOES TO  CONN 5 PIN 10 ON POWER SUPPLY
21 - COIN METER UNREG+5 GOES TO CONN 5 PIN 1 ON POWER SUPPLY

-------------------------------------------

J6 - 10 pin  (ONLY USED FOR A COCKTAIL VERSION)

8  - KEY

(7 WIRES GO TO 10-4 ON THE PLAYER TWO ANGLE ENCODER BOARD)

1  - D0
2  - D1
3  - D2
4  - D3
5  - D4
6  - D5
7  - D6

(1 WIRE GROUNDED BY J4:9)

9  - PLAYER 2 FIRE



============================================
DUAL AMP BOARD (A082-90910-0000)
============================================

J1 - 8 Pin

4  -  KEY

(3 WIRES GO TO J3 CPU BOARD)

2  -  RIGHT AUDIO
3  -  SHIELD (also called STRAND)
6  -  LEFT AUDIO

(2 WIRES GO TO J5 POWER SUPPLY)

5  -  AUDIO RETURN
8  -  AUDIO

--------------------------------------------

J2 - 6 Pin

3  -  KEY

(2 WIRES GO TO LEFT SPEAKER)

4 - + (PLUS)
6 - - (MINUS)

(2 WIRES GO TO LEFT SPEAKER)

1 - + (PLUS)
2 - - (MINUS)



===========================================
ANGLE ENCODER BOARD (A082-91418-D000)
===========================================

13 Pin

11 -  KEY

(3 WIRES GO TO J5 POWER SUPPLY)

1  - +12v
2  - GND
13 - +5v

(7 WIRES GO TO J4:10-13,15-17 (J6:1-7 FOR PLAYER 2))

10 - D0
9  - D1
8  - D2
7  - D3
6  - D4
5  - D5
4  - D6



===========================================
POWER SUPPLY BOARD (A082-90412-8000)
===========================================

J3 - 9 Pin (GOES TO FILTER ASSEMBLY)

2  - 8v COM
3  - 8v COM
4  - 8v UNREG
5  - 12v COM
6  - 15v UNREG
7  - 5v COM
8  - 8v UNREG
9  - 12v COM

------------------------------------------

J4 - 15 Pin (GOES TO J1 CPU)

1  - V.BATT
3  - +5v
4  - A.GND
5  - +5v
6  - +5v
8  - GND
9  - GND
10 - GND
12 - +12v
15 - RESET

-------------------------------------------

J5 - 15 Pin

(2 WIRES GO TO J1 CPU)

2  - +5v
5  - GND

(2 WIRES GO TO J5 SUPER SOUND I/O)

1  - COIN METER UNREG+5
10 - COIN METER RETURN

(3 WIRES GO TO THE ANGLE ENCODER BOARD(S)S)

3  - GND
4  - +5v
9  - +12v

(2 WIRES GO TO J1 DUAL AMP)

13 - AUDIO
15 - AUDIO RETURN

(2 WIRES GO TO COIN DOOR & DISPLAY LIGHTS)

11 - RETURN FROM LIGHTS (GND?)
14 - +12v

------------------------------------------

J6 - 3 Pin (GOES TO MT-93 XFORMER)

2  - ??? (is it center tap?)
3  - 12v (VIA 2 AMP SLO BLO FUSE)



============================================
FILTER ASSEMBLY (A945-00002-0000)
============================================

INPUT - 9 Pin (FROM MT-96 XFORMER)

1  - 8v (AC?)
2  - CENTER TAP 8v?
3  - 8v (AC?)
4  - CENTER TAP 15v?
5  - CENTER TAP 8v?
6  - CENTER TAP 15v?
7  - 15v (AC?)
8  - GND?
9  - 15v (AC?)

------------------------------------------

OUTPUT - 8 Connections (TO POWER SUPPLY)

(THEY ARE UNNUMBERED IN THE SCHEMATICS.
 SEE THE POWER SUPPLY BOARD SECTION FOR
 WHAT IT NEEDS)